PINNACLE - JUMBO 3D SUPER | IMAGING WHEEL ALIGNER

pinnacle jumbo

Pinnacle – JUMBO 3D Super Imaging Wheel Aligner

 Jumbo 3D Super supplied with 10 targets and integrated wheel brackets enables the user to measure results of all 5 axles simultaneously. 

 FREE SHIPPING 

MODEL JUMBO 3D
$37,995 MSRP

CLICK TO SEE SPECIAL PRICE

Features

  • One shot Runout compensation of all 5 axles
  • One shot caster swing for twin steer axles
  • Quick results, high productivity
  • Less labor cost

Jumbo 3D uses latest, innovative, digital-imaging technology by deploying quad camera system for data- acquisition. High-resolution digital cameras, two per side, operate with intelligent software & capture seamless images of targets

INCLUDES INSTALLATION, SETUP, ONSITE TRAINING & FREE SHIPPING!

PINNACLE JUMBO 3D SUPER 1

No Electronics on wheels

  • No expensive service bills due to an accidental drop of electronic sensors
  • No sensor calibration issues
  • No battery discharge issues
  • Compact and lightweight

One Shot Caster swing for twin axles

  •  Caster swing can be performed for twin steer axles simultaneously
  • 4 nos Rotary plates supplied as a standard accessory
  • No need to remove and refix the targets for each axle
  • Increases productivity

Parallelism, Thrust / Scrub Angle, & Single Axle Adjustment

 Parallelism Adjustment 
Alignment of Front twin steerable axles to maintain parallel condition 

Thrust / Scrub Angle Adjustment 
Alignment of Rear multi axles 

Single Axle adjustment 
Thrust angle adjustment in a single axle vehicle is a tedious job using conventional trial & error method. 
Single axle adjuster tool helps in effortlessly adjusting the thrust angle precisely. 
Saves considerable time and energy. 

PINNACLE JUMBO 3D SUPER 2
PINNACLE JUMBO 3D SUPER 3

Filters – LED

1st in the World

 One shot Runout Compensation of all 5 axles

  • Runout carried out by driving the vehicle
  • Alignment completed within 1/3 the time of conventional methods
  • No need to remove and refix the clamps and targets for each axle
  • No Jacking up of wheels
  • No need for vehicle pusher
  • Enormous time saving and productivity increased

Tractor & Trailer Alignment 

Standard Accessories

  •  Wheel brackets(12″-24″) | 10 Nos.
  • Target plates | 10 Nos.
  • Rotary plates (7 ton) | 4 Nos.
  • Steering lock | 1 No.
  • Brake pedal lock HCV | 1 No.
  • Brake pedal lock LCV | 1 No.
  • Adaptor for rim locking pins | 40 Nos.
  • PC console with Windows embedded OS, Key board & Mouse | 1 No.
  • LED monitor (21.5″) HDMI interface | 1 No.
  • LED monitor secondary (21.5″) VGA interface | 1 No.
  • Target stands (2Tx2, 3Tx2) | 4 Nos.
  • Remote | 1 No.
  • Truck alignment & Data manager software | 1 No.
  • Single axle adjuster | 1 No.
  • Wheel stoppers | 2 Nos
PINNACLE JUMBO 3D SUPER 4
PINNACLE JUMBO 3D SUPERoptional

Optional Accessories

  •  Wheel bracket extension adaptors | 40 Nos.
  • Frame offset gauge | 1 No.
  • Tyre dia guage | 1 No.
  • Printer | 1 No.
  • 4 shaft calibration kit (HCV) | 1 No.

Car Kit (Optional)

  • Rim locking pins (for Runflat tyre rims & Fancy disc)
  • Rim locking pins (for Standard & Steel rims) | 1 No.16 Nos.
  • Car alignment & Vehicle data software | 1 No.1 No.
  • Front target plate extension spacer 150 mm long | 1 No.4 Nos.

 

 

If you haven’t found the answers you were looking for,

Contact us for further information Diagnostic Support – Training – Product Information – Sales – Product Management

CONTACT US